Changing IP in PC

How To: Change Your Ip In Less Then 1
Minute
1. Click on "Start" in the bottom left hand
corner of screen
2. Click on "Run"
3. Type in "command" and hit ok
You should now be at an MSDOS prompt
screen.

4. Type "ipconfig /release" just like that, and
hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My
Network Places" on your desktop.
7. Click on "properties"
You should now be on a screen with
something titled "Local Area Connection", or
something close to that, and, if you have a
network hooked up, all of your other networks.
8. Right click on "Local Area Connection" and
click "properties"

9. Double-click on the "Internet Protocol (TCP/
IP)" from the list under the "General" tab
10. Click on "Use the following IP address"
under the "General" tab
11. Create an IP address (It doesn't matter
what it is. I just type 1 and 2 until i fill the
area up).
12. Press "Tab" and it should automatically fill
in the "Subnet Mask" section with default
numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again
You should now be back to the "Local Area
Connection" screen.
15. Right-click back on "Local Area
Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address
automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address
With a little practice, you can easily get this
process down to 25 seconds.
P.S:
This only changes your dynamic IP address,
not your ISP/IP address. If you plan on
hacking a website with this trick be extremely
careful, because if they try a little, they can
trace it back.

Posted By - Avadh Patel